Product Details:
|
Material: | Synthetic - Rubber | Product Name: | Smooth Surface Permanent Anti-stain Pavement Marking Tapes |
---|---|---|---|
Thickness: | 1.0mm -1.5mm | Width: | 15cm, 20cm, 25mm, 45cm |
Length: | 60m | Application: | Highways And Graded Roads, Parking Lot |
High Light: | Anti Stain Thermoplastic Road Marking Tape,Smooth Thermoplastic Road Marking Tape,Thermoplastic Reflective Pavement Tape |
Permanent Anti-stain Pavement Marking Tapes (Smooth Surface)
Description
The surface is free of glass beads, flat, and easy to clean. The base material of the preformed material is composed of polymer flexible polymer rubber, fillers, pigments, etc., and a layer of high wear-resistant and environmentally friendly paint is planted on the surface.
Technical Parameters
Nature | General data | Unit | Test Methods | |
KT5011 | KT5012 | -------- | -------- | |
Color | white | yellow | -------- | -------- |
Thickness | 1.3 | 1.3 | mm | GB/T 7125 |
Water resistance | pass | pass | -------- | GB/ T24717 |
Acid resistance | pass | pass | -------- | GB/ T24717 |
Wear-resistant | 40 | 40 | mg | GB/ T24717 |
Minimum adhesion | 25 | 25 | N/25mm | GB/ T24717 |
Instructions:
1. The road marking tape can be divided into two types: with adhesive backing and without adhesive backing. The type without adhesive backing is commonly used in special environments and with special materials, such as two-component AB glue, 502 glue, and other adhesives for bonding.
2. The products with adhesive backing can be further categorized based on their actual usage, whether to apply primer or not: Without brush primer on the ground: It can be directly applied to smooth and flat surfaces without applying primer. Brush primer on the ground: It should be applied with primer on uneven surfaces or walls (e.g., Pattex Contact Adhesive, Maxbond UL 1603HFR-HS). The amount of primer required depends on the smoothness of the bonding surface, approximately 1 kilogram per 3 to 5 square meters. Please refer to the construction instructions when using the primer.
Standard Product
Item No.: KT5001(without adhesive backing), KT5011(with adhesive backing)
Colour: two-colour,three-colour,four-colour, multi-colour
Pre-formed coloured floor markings can be produced in different sizes, shapes and colours.
Product Code | Length(m) | Width(cm) | Thickness(mm) | Weight(±10%) | Conventional packaging |
KT5001 | 40M |
5,10,15,20 Customizable |
1.0-1.5MM | 2.0kg/sqm | 300*300*320MM |
KT5011 | 35M |
5,10,15,20 Customizable |
1.2-2.0MM | 2.2kg/sqm | 300*300*320MM |
Application scope
Suitable for rubber products, concrete, asphalt, cement, marble, epoxy floor, ceramic tile, etc., basically suitable for bonding various floors and walls. Best for ground and walls.
The main advantage is that it is resistant to dirt and eye-catching, even if it is dirty, it is easy to clean.
It can be made into various marking lines, arrows, characters, patterns, color signs, logos, color three-dimensional signs, pipeline signs, etc.
According to the condition of the road surface, the flow of people, and the installation situation, the service life can reach at least 3 years.
Features
Contact Person: Dean
Tel: +86-18611322232