|Features:||Wearproof, Convenient For Construction||Material:||Synthetic Rubber|
|Product Name:||Pavement Marking Tapes, Road Markings, Arrow Marking, Warning Marking||Size:||As Required|
|Reflective:||Non - Reflective||Application:||Basement Parking, Road Markings, Parking Lot|
Temporary Pavement Marking Tape,
Road Pavement Marking Tape,
Warning Concrete Marking Tape
Pavement Marking Tapes - Arrow Marking and Warning Marking
Pre-formed coloured floor markings (pattern) is preformed by synthetic rubber, with good flexibility and tensile strength; The surface is free of glass beads, flat, and easy to clean. At the same time, the use of high-performance paint, with good wear resistance. The bottom layer is an adhesive with strong adhesion and good weather resistance, which makes the tape stick firmly to the ground. It has the characteristics of preforming and easy laying.
|Nature||General data||Unit||Test Methods|
|Water resistance||pass||pass||--------||GB/ T24717|
|Acid resistance||pass||pass||--------||GB/ T24717|
|Minimum adhesion||25||25||N/25mm||GB/ T24717|
Item No.: KT5001(without adhesive backing), KT5011(with adhesive backing)
Colour: two-colour,three-colour,four-colour, multi-colour
Pre-formed coloured floor markings can be produced in different sizes, shapes and colours.
Widely used in various highways and graded roads.
Suitable for all kinds of competitions, large-scale activities, scenic spots, tourism promotion and other ground logo patterns.
Proper surface preparation is essential for satisfactory results. Essentially, the surface must be clean and dry, with a minimum surface temperature of, 10℃ and rising. Pavement Marking Tape cannot be successfully applied over loose or caked dirt, gravel, oily residues, road salt residues, or other foreign substances which will interfere with proper bonding. Manufacturer’s application instructions with more detailed information are included in each carton.
Good flexibility and tensile strength.
The surface is coated with reflective glass beads, which has good night reflection.
Use of high-performance gule, with good wear resistance.
The bottom layer is an adhesive with strong adhesion and good weather resistance, which makes the tape stick firmly to the ground.
Preforming and easy laying.
Customized preformed marking (pattern) is divided into embedded construction and surface construction, with the use of primer glue. Under the condition of the new road surface, each kilogram of primer glue can lay 3-5 square meters of highway reflective tape, and the actual use is mainly based on the condition of the road surface. Please refer to the construction instructions.
The performance life of KT5001/KT5011 plastic marking materials will vary greatly depending upon traffic conditions, snow removal practices, pavement surfaces, and application techniques.
Contact Person: sales