|
Product Details:
|
| Material: | Aluminum Foil: 25u / 2-way Scrim: 5x5mm | Product Name: | Aluminum Foil Scrim Tape, 2-Way FS Tape |
|---|---|---|---|
| Adhesive: | Synthetic Rubber-Resin Adhesive | Product Code: | FS2805B |
| Backing Thickness: | 50mic | Total Thickness: | 90mic |
| Service Temperature: | -20 ~ + 80 Degree Centigrade | MOQ: | 2000 Rolls |
| Feature: | Thermal Insulation, Wear-resistant | Application: | Duct Board Joints And Seams |
| High Light: | 2 Way Aluminum Foil Tape,Scrim Aluminum Foil Tape,Reinforced fsk aluminium tape |
||
2-Way Reinforced Aluminum Foil Scrim Tape - FS2805B
Description:
2-way Foil-Scrim facing laminated fiberglass blanket backing(Foil: 25u / 2-way Scrim: 5x5mm), combined with a transparent high performance synthetic rubber-resin adhesive, protected by an easy-release silicone release paper.
Standard Products:
| Product code | Aluminum Foil Scrim Tape - FS2805B |
| Material | Aluminium Foil Scrim facing laminated fiberglass |
| Gule | High Performance Synthetic Rubber-Resin Adhesive |
| Cut Roll | 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4") |
| Log Roll | 1200mm x 45M / 50M |
| Jumbo Roll | 1200mm x 500M / 750M |
| Sample | Free, Freight on buyer |
Typical Physical Properties:
| PROPERTIES | METRIC | ENGLISH | TEST METHOD |
| Backing Thickness | 50 Micron | 2.0 Mil | PSTC-133 / ASTM D 3652 |
| Total Thickness | 90 Micron | 3.6 Mil | PSTC-133 / ASTM D 3652 |
| Adhesion to Steel | 20 N/25mm | 72 Oz./In. | PSTC-101 / ASTM D 3330 |
| Tack Rolling Ball | 20 cm | 8.0 In. | PSTC-6 / ASTM D 3121 |
| Tensile Strength | 120 N/25mm | 27.3 Lb/In | PSTC-131 / ASTM D 3759 |
| Elongation | %. | 3.0 | PSTC-131 / ASTM D 3759 |
| Service Temperature | -20 ~ +80 °C | -4 ~ +176 °F | ------------ |
| Applying Temperature | +10 ~ 40 °C | +50 ~ +105 °F | ------------ |
Features:
• Heat reflection and Light reflection
• High adhesion and stability solvent adhesive
• Vapor barrier and moisture proof.
• Wear-resistant
Applications:
For the glass wool, rock wool, mineral wool and other thermal insulation materials, heat-sealing veneer and vapor barrier layer, for cotton, cotton and cotton liner online heat sealing veneer, to meet HVAC duct, cold and warm water pipe Adiabatic and vapor bamer needs and insulation requirements for steel construction.
Packaging & Shipping
Surface Preparation
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
Product Use
It is essential that the user evaluate the KintTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on KintTape products between +10℃ ~ 40℃(+50°F ~ +105°F).
Contact Person: Dean
Tel: +86-18611322232
