One-stop Service Provider for All Kinds of Tapes.

What is the general electrical tape width

by:Kint      2020-04-02
1, 1500 unleaded electrical insulation tape; Size: 18 mm x 10 m x is 0. 13mm; Color: black; Voltage level: 600 v and below; Dielectric strength: > 39. 37 kv /毫米( 1000v/mil) 。 2, 1600 unleaded electrical insulation tape; Standard ( Thickness * length * width) :18毫米×20 m×0。 15mm; Color: black; Level of temperature: 80 ℃ ( 176℉) ; Thickness: 6 mils; Voltage level below 600 v; Dielectric strength & gt; 39. 37kv/mm( 1000v/mil) ; Insulation resistance & gt; 10 ^ 12 ohms. 3, electrical tape, 1300 USES: applicable to all kinds of wire insulation coating industry, easy tear easily. Level of temperature: 0 ° c - Below the level of 80 ° c voltage: 600 v. Main use around the wire and cable, waterproof insulation maintenance are suitable for all kinds of insulation resistance parts. Such as wire connection, insulation damage, transformers, motors, capacitor, voltage regulator and other kinds of insulation protection of electrical and electronic parts. Can also be used in industrial processes therein, fixed, lap, repairing, sealing, maintenance. Use the power cord connector is divided into 'ten' word connection, the character 'one' connection, 'ding' word connection, etc. Joint should be put in mind, lubrication without a thorn. Before thread broken, should press gently with wire cutters, first around to mouth, and then from side to side, thread will be submissive to the disconnect joint. If the connector in a dry place, should use insulation cloth wrapped two layer first, and then wrapped in plastic tape ( Also called PVC adhesive tape) Two layers, the second with J - 10 insulating adhesive tape stretched around 200% around two or three layers, and finally up two layers of plastic adhesive tape. Due to the direct use plastic tape shortcomings of: plastic tape moment open a long plastic displacement, plastic easily; Electrical load weight, fever, joint plastic electrical tape is easy to melt to shorten; Mains connections in the terminal box, each other connector have burr, simple stamp empty plastic tape, etc. , these dangerous directly endanger the personal safety, caused line moderate, causing a fire. And use black insulation tape will not more than present conditions. Surely it has strength, flexible, can be long time in tapping, affected by time and temperature and dry fixed type, not falling, and flame retardant. Moreover, with black insulation tape wrapped up again after tape to moisture, rust. Has its drawbacks as well as insulating adhesive tape, however, it has good waterproof function but easy to break, so it should be wrapped in two layer plastic tape for maintenance, the insulation of the joint and the joint since stick with each other not sticky, function better. Institute of electrical tape using the method, applied correctly, to avoid leakage, reduce damage.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...