The correct method of sticking double-sided adhesive tape: 1. Before pasting the plate, we put the plate material, adhesive tape and pasting roller at the same room temperature for a period of time;
2. Before pasting, the printing plate and pasting cylinder must be cleaned;
3. If the plate is pasted on the sleeve, the minimum air pressure must be used to prevent the sleeve from deforming;
4. The joint of double-sided adhesive tape should be staggered with the joint of printing plate;
5. When pasting adhesive tape, it is better to use a rubber scraper to evenly paste the adhesive tape on the roller by scanning parallel. No bubbles can be left between the adhesive tape and the plate roller; (If there are bubbles retained, apply acupuncture to eliminate them)
6. Before determining the position of the printing plate, avoid premature contact between the printing plate and the adhesive tape. After determining the printing position, while removing the protective layer of the adhesive tape, the printing plate is pasted on the adhesive tape by a rubber roll swept parallel;
7. When cleaning the printing plate during the printing process, avoid cleaning solvent contacting the adhesive tape to avoid damaging the adhesive tape;
8. When the printing plate is removed from the adhesive tape, the included angle between the printing plate and the adhesive tape shall not be greater than 90 degrees.
9. Leave about 5mm of the plate interface, and use 3M 1600 electrical insulation tape to seal the plate has a good effect, which can effectively avoid ink pollution caused by plate interface warping caused by plate wiping, and very economical.
10. Excessive and repeated use of double-sided adhesive tape will lead to poor overprinting, especially when there are new ones in a set of plates and it is easy to occur when it is used for a long time. Jia Feixiang Adhesive Products Co. , Ltd (0411-39911323)
, The Northeast region really does not residue adhesive tape master roll manufacturer (Hot Melt Adhesive tape)!
Mainly produces all kinds of tape master, semi-finished tape, foam tape master, masking tape master, cloth tape, paper-based tape.
With dozens of patented formulas, it fills the gap in such products in China!
Beijing Kint Yongji Technology Co., Ltd has been engaged in the tape industry for decades. We have been focused on the production, processing and export of tapes. We always adhere to the principle of "integrity, fairness and mutual benefit" and provide customers with all kinds of high-quality tapes and good service. At present, our products have been widely sold in more than 60 countries and regions.
Contact Person : Dean Yao
Tel : +86-18611322232
E-Mail : email@example.com Whatsapp : 18611322232
Office Add : 3B-508 STAR PARK XIHONGMEN BEIJING, P.R.CHINA