One-stop Service Provider for All Kinds of Tapes.

How to remove static electricity from adhesive tape?

by:Kint      2020-02-17
Static electricity is actually generated on the tape, which is not static tape. How to remove static electricity from adhesive tape? The small Editor of pvc pipe tape manufacturer will tell you that 1. Tape is a better kind of wire and roller is made of conductive material, and the two are grounded, in this way, static electricity is generated between the adhesive tape and the idler and between the adhesive tape and the conveying materials due to friction or separation. 2. The speed of the adhesive tape should not be too high, and there should be no sharp change at the same time, so as to prevent the danger of increasing static electricity due to the vibration of materials. 3. We should clean the surface of the tape and the roller regularly, and try to avoid installing a brush on the tape instead of cleaning. 4. When conveying solid materials with a hopper, static electricity will also be generated due to the friction between the Hopper and the materials and between the materials. Therefore, the Hopper with larger conveying volume should also be made of conductive materials and should also be grounded. 5. The Hopper above should not vibrate, their conveying speed should not be too high, and there should be no sharp change. At the same time, collapse during loading should be prevented, and try to avoid the bad consequences of the whole material caused by vibration. 6. How to remove static electricity from adhesive tape? When people transport and package solid materials, friction should be avoided as much as possible. Packaging made of non-conductive foaming materials should be avoided as much as possible in packaging. There are six main methods to remove static electricity from the tape, which can also prevent static electricity from being generated on the tape.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...